Application and Usage Methods of Nitrile Rubber Compounds
Release time:
2026-09-20

Nitrile rubber (NBR) compound is one of the most widely‑used synthetic rubber materials, formed by blending nitrile rubber base polymer with reinforcing fillers, plasticizers, vulcanizing agents, anti‑aging agents and other auxiliary additives. Its outstanding oil‑resistance, moderate mechanical strength and good processing performance make it irreplaceable in industrial sealing, transmission and fluid‑contact components. The performance of finished products largely depends on proper compound formulation and standardized processing operations.
In terms of industrial applications, nitrile rubber compounds are mainly used for oil‑resistant sealing parts. Automotive industry is its largest application field. It is processed into oil seals, O‑rings, gaskets and hose liners for engines, gearboxes and hydraulic systems. These parts can withstand long‑term contact with mineral oils, lubricants and fuel, avoiding swelling and degradation caused by oil immersion. In hydraulic and pneumatic equipment, NBR compounds are manufactured into piston seals, rod seals and valve gaskets. They maintain stable sealing performance under medium pressure and temperature, preventing oil and gas leakage. Besides, nitrile rubber compounds are applied to produce oil‑resistant hoses, conveyor belts for oil‑contaminated working environments, and various rubber‑metal bonded parts. It should be noted that NBR is not suitable for strong polar solvents, ozone‑rich environments or high‑temperature conditions above 120 °C. For such working conditions, other rubber materials shall be selected instead.
Correct mixing and processing procedures are essential to give full play to the performance of nitrile rubber compounds. First, raw material preparation: confirm the nitrile rubber grade according to required oil resistance and hardness. Higher acrylonitrile content delivers better oil resistance but reduces low‑temperature flexibility. Prepare all additives including carbon black, plasticizer, vulcanizer and antioxidant in proportion.
The mixing process is usually carried out on an open mill or internal mixer. For internal mixing, put nitrile rubber into the mixer first for plasticating. Then add reinforcing fillers and plasticizers step by step. After full dispersion, add vulcanizing agents and accelerators at lower temperature to avoid premature vulcanization. The mixing temperature must be controlled below 110 °C. Over‑high temperature will cause scorch and damage rubber properties. After mixing, discharge the compound and cool it down to room temperature. Then perform milling on an open mill to achieve uniform dispersion of all ingredients. After mixing, the compound should be stored in a cool, ventilated and dark place, away from heat, sunlight and oil pollution. Improper storage may lead to premature vulcanization.
Vulcanization is the key step to obtain finished rubber products. Select proper vulcanization temperature, pressure and time according to compound formula and product thickness. Common vulcanization temperature ranges from 140 °C to 160 °C. Thicker products require longer vulcanization time. Insufficient vulcanization brings low strength and poor elasticity, while over‑vulcanization causes brittleness and cracking. During molding, keep the mold clean. Remove air bubbles inside the compound to avoid defects on finished parts.
In practical production, operators need to inspect the compound before processing. Check for scorch, uneven dispersion and surface defects. If scorch occurs, the compound cannot be used for production. After vulcanization, carry out performance tests such as hardness, tensile strength and oil‑immersion resistance to verify product quality.
To sum up, nitrile rubber compound delivers reliable oil‑resistant performance for numerous industrial sealing components. Strict control over mixing temperature, additive dispersion, vulcanization parameters and storage conditions guarantees stable product quality. Proper selection of nitrile grade and processing parameters according to actual working conditions is the core of successful application of NBR compounds.
RELATED INFORMATION